CYCLAIR® 180

The CYCLAIR® 180 is a portable differential pressure device used to apply negative pressure to confined and difficult-to-access areas. 

SHARE THIS PRODUCT

Share on facebook
Share on twitter
Share on linkedin
Share on email

Features

As standard:

+ A needle pressure gauge for continuously measuring clogging of the filter

+ Cable with a A16 connector provides a 110 V single-phase power supply to the equipment.

+ This supply voltage is used to automatically restart the device in the event of a power failure

+ An On/Off button controls the fan

+ A potentiometer varies the fan speed to ensure the required flow of air

+ Fitted with absorbers, it can be placed on the floor without risking any damage

+ A handle is used to carry the device about on site

+ A strap enables the device to be carried over the shoulder

+ The device is connected via a swivel connector (Ø 6,69 in).

As an option:

+ A trolley on castors can be used to move the CYCLAIR® 180 around even more easily

+ An airtightness report following an uranine test.

Description

The CYCLAIR® 180 is a portable differential pressure device used to apply negative pressure to confined and difficult-to-access areas.

For protecting people and their natural environment from the spreading of radioactive particles. For processing alpha and beta radiation particles.

 

Operation:

+ Negative pressure is applied to the work area to prevent contaminants from spreading

+ The CYCLAIR® 180 is equipped with a 110 V single-phrase fan with a speed controller to ensure an extraction air flow rate of 180 cfm

+ The contaminated air is sucked in via flexible ducts (118 in length) fitted with swivel connections.

+ The air is purified by a “nuclear”-type HEPA filter.

+ It is coated in decontaminable paint.

+ The CYCLAIR® 180 has been designed so that it can be easily carried over the shoulder (strap) or by hand (handle). It weights less than 38 lbs

+ It is designed to guarantee total airtightness

 

USE CASE:

+ Direct dynamic containment

The CYCLAIR® 180 is used to apply negative pressure and to ensure filtering of dispersed pollutants (valves).

+ Static/dynamic containment

The CYCLAIR® 180 is used to apply negative pressure to an airlock used as a containment system for a work area

+ Radiation protection during dismantling phases

The CYCLAIR® 180 can be used when carrying out minor procedures or on sites where operators require protection.

Specifications

Nominal Flow: 180cfm

Fan Power: 0.17 kW

Sound Pressure: 52.7 dB(A) at 3 m

Overall Weight: 38lbs

Dimensions:

Diameter: 15 in

Length: 31.5 in

URANINE purification coefficient (*) : > 5000

(*): absolute filter: DOP and NacL efficiency > 99.99%

Related Products

CYCLAIR ® 90X, 180X